Inductive sensor NCN50-FP-W-P4-V12-N.O. - фото 1 - id-p93675257

Характеристики и описание

General specifications
Rated operating distance	50 mm
Installation	non-flush
Output polarity	AC
Assured operating distance	0 ... 40.5 mm
Reduction factor r_Al	0.4
Reduction factor r_Cu	0.3
Reduction factor r₃₀₄	0.85
Output type	2-wire
Nominal ratings
Operating voltage AC	20 ... 253 V
Switching frequency	0 ... 20 Hz
Hysteresis	3 ... 15 % 5 % typical
Voltage drop	? 5 V
Momentary current (20 ms, 0.1 Hz)	max. 4000 mA
Operating current	5 ... 500 mA
Off-state current	0.3 ... 1 mA typ. 0.7 mA
Time delay before availability	? 100 ms
Operating voltage indicator	LED, green
Switching state indicator	LED, yellow
Compliance with standards and directives
Standard conformity
Approvals and certificates
CCC approval	Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type	1/2"-20 UN , 3-pin
Housing material	PBT/base of metal
Sensing face	PBT
Housing base	metal
Degree of protection	IP68
Note	¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse ? 2A (quick-blow) according to IEC60127-2 Sheet1 Recommendation: after a short circuit, check that the device is functioning correctly.